Blog posts tagged with 'rolled metal'

Albina bent some channel for a boardwalk at the Evelyn Schiffler Memorial Park in Beaverton, OR. In the very center of the park, a 2.4-acre wetland attracts native wildlife. It can be appreciated from two long stretches of boardwalk consisting of:
7,600# (18 lengths x 40 ft) of bent C6 X 10.5# A36
All parts were bent the hard way to AESS standards.
110 ft minimum bent to a 296 ft radius
176 ft minimum bent to a 213 ft radius
160 ft minimum bent to a 206 ft radius
121 ft minimum bent to a 303 ft radius
All Material Bent by Albina Co., Inc. Customer fit and fabricated.

Boy how the tide has turned! No longer do I hear, “I don’t want to go to school today!” Instead I hear, “I can’t wait until we get to go back to school!” Kids across the country are gaining a new appreciation for how important it is to physically be able to enter their school buildings to learn. We have been very fortunate to be involved in a number of projects at schools across the nation including custom spiral and circular staircases, curved steel signs, curved steel artwork, curved steel canopies, and more!

Todays Highlight: Curved Steel at our Nation’s Schools & Universities

“We have to remember what’s important in life: friends, waffles and work. Or waffles, friends, work. But work has to come third.” Leslie Knope Parks & Recreation Quote Ha!

Todays Highlights: Curved Steel in our Parks & Recreational Facilities

Oh, The Places You’ll Go- “Congratulations! Today is your day. You’re off to Great Places! You’re off and away!” -Dr. Suess. I know we are all anxiously awaiting the day that we can back out on the roads, in the skies, on the rails, or whatever your preferred form of travel may be. Keep the faith and check out a few of the transportation projects we have been a part of over the years.

“In the moment of crisis, the wise build bridges and the foolish build dams.” -Nigerian Proverb
We are choosing build bridges, figuratively and literally.
Today’s Infrastructure Highlight: Curved Steel for Bridges

The use of cold formed steel as a construction material dates back into the 1800’s and has been the primary building block for America’s infrastructure. The one word I think of when I hear the word “steel” is “strong” and when we are building with steel, we are building a “Strong America.” This week, I will be highlighting a few of the projects we have been a part of over the years that shows how strong we were, how strong we are, and how strong we will continue to be.
Today’s Highlight: Hospitals & Medical Facilities (Special shout out to those on the front lines. We thank you for all of your efforts!)

Albina recently bent 8 Pieces of 6" Sch80 pipe bent to 90°+ on a 5 foot radius to help create a beautiful canopy for the San Ramon Valley United Methodist Church in Alamo, CA. The curved steel pipe pieces provided the structural supports for the overhead canopy. The San Ramon Valley United Methodist Church is located in Alamo, CA.

Albina Co., Inc. recently rolled 16 pieces of 5/8" plate A36 to as tight as a 162" radius. Six pieces of plate were used as the inside stringers of a beautiful spiral staircase at Altar'd State at the Forum Shops at Caesar's Palace. Six pieces of plate were used as the outside stringers of the staircase, and four pieces were used on the landings. We bent the stringers, trimmed rectangular treat cut outs, trimmed to length, match paired plates, tacked them together and match drilled all holes. We bolt matched the plates together with a 6 bolts, (2) on the end, (2) in the middle, and (2) on the other end.

We also bent 2½" X 2½" X ¼" ANGLE A36 to help create the spiral staircase. Materials included:

1 piece leg in to a 25” inside radius.  Albina to bend 180° minimum.

1 piece leg out to a 162” inside radius.  Albina to bend 70” minimum arc.

1 piece leg out to a 30” inside radius.  Albina to bend 36” minimum arc.

1 piece leg out to a 19” inside radius.  Albina to bend 80” minimum arc.

1 piece leg in to a 38” inside radius.  Albina to bend 180° minimum.

Lastly, we bent one piece of Flat Bar 5/8" x 12" A36 UM Plate leg in to a 38” inside radius and 180° minimum.

Albina bent 40,000# of steel for the Freyer-Newman Center, home to Denvers’ Botanical Gardens. Albina bent 60 pieces of W8 X 31# A992 the hard way to a full scale layout. We also bent Tube Steel 8" X 6" X .500" WALL A500 GR B the hard way and MC8 X 20# A36 the hard way. The Freyer - Newman Center is a LEED GOLD building, designed by Denver’s Davis Partnership Architects. The Center will house six classrooms; four galleries; new herbaria for vascular plants, mushrooms and slime molds; laboratories; a new library and a coffee shop, and is slated for completion this spring. Final install pictures coming soon!

Albina provided 109,000# of bent steel for the Eli Lilly San Diego Biotech Center in La Jolla, CA. Eli Lilly doubled the size of its research facility to 300,000 square feet during this project. Materials included: 8″ X 8″ X 5/8″ ANGLE A36- half of the parts rolled leg in and half of the parts rolled leg out. Tube Steel 8″ X 8″ X .500″ WALL A500 GR B 8 5/8″ OD X .625″ WALL A500B Wide Flange W16 X 57# A992- Split into WT8 and rolled some parts stem in and rolled some parts stem out. Wide Flange W24 X 103# A992- DOUBLE split to a finished height of 8¼” tall. Albina then rolled some parts stem in and other stem out.