Blog

The Leach Botanical Garden in Portland, Oregon underwent a six year, $12.6 million dollar renovation complete with new garden space, walking paths, a unique curved steel Aerial Tree Walk, an arbor and a fireside terrace. The Oregonian featured an article titled "Leach Botanical Garden Unveils $12.6 Million Renovation, a Gift of Green Space for SE Portland."

Albina bent the following materials for the project:

3" X 2" X ¼" ANGLE T304L S/S
63 lengths rolled to various configurations and radii- all per customer supplied drawings.
Customer to trim and splice as required (Albina roll only).

W12 X 26# A588
24 lengths 40 – 50 ft long.
Rolled the easy way to various configurations and radii- all per customer supplied drawings.
Customer to trim and splice as required (Albina roll only).

FB ¼" X 4" A588
49 lengths x 20 ft
Rolled the easy way to various configurations and radii- all per customer supplied drawings.
Customer to trim and splice as required (Albina roll only).

Albina Co, Inc. produces consistent, accurate and repeatable rolled metal parts and components for various OEM and industrial business sectors. We produce small parts such as pipe spools, hydraulic lines, handles, brake bands, boiler tubes, heat exchangers, and coils.

We bend and fabricate pipe spools for a variety of different industries. We have the ability to provide small and large spools out of both carbon and stainless materials. Our qualified welders can TIG or MIG weld spools depending on customer requirements.

Our bent steel can be seen on various applications in the auto, marine, aviation, locomotive, agricultural and food processing sectors. Our bends are used on locomotive frames, boat frames, deck rails and even components for homeland security helping to protect our docks and ports. Here is an example of an extremely impressive bend for a commercial processing application:

Albina bent, torch cut out, fit and tack welded 10" SCH120 SA106B SMLS to a 12 ft radius.

Our plate roll is consistently rolling custom tanks for countless industries, brake bands for industrial manufacturers and non-standard pipe diameters.

Our qualified crew has the skills required to fabricate your wear backs, or other pressure retaining components.

If your product needs to be opened, closed, held or picked up, we can produce your handle!

Albina has the expertise to bend coils to virtually any configuration. We coil all forms of material: pipe, tubing, square and rectangular. We also work with all types of material: carbon, stainless, aluminum, copper, zirconium, etc. One call can result in bent material fully fabricated with flanges, fittings, miscellaneous components, etc.

Most alternative energy projects require AESS (Architecturally Exposed Structural Steel) and Albina can bend to your AESS requirements. Team up with Albina on your next project so we can help you recognize savings and treat you to a stress free experience. 

We specialize in architectural exposure quality spiraling of tube steel, channel, plate and pipe to amazingly tight radii and steep pitches and we work on both commercial and residential applications. this blog highlights a few recent Residential Spiral Staircase projects we have been a part of.

Two lengths spiral bent to a 13 ft plan view radius of 8" SCH40 A53B ERW WHEELED

1 piece Plate ½" THICK X 12" WIDE A36 rolled to a 52” inside plan view radius and 1 piece Plate ½" THICK X 108.92" WIDE A36 rolled to a 15½” inside plan view radius for a private residence.

Plate ½" X 14" A36 stringer 2 lengths spiral rolled the easy way to a 4’-8 7/8” radius. ½" SOLID ROUND A36 (railings)- not pictured. 20 lengths x 20 ft- spiral rolled to a 4’-8 7/8” radius.

As we near the end of the pandemic, and start to come out of the recession, we are seeing little signs of change and positivity more and more every day. The phones are ringing, people are becoming more engaged, and projects are finally getting off the ground. Together, we have the opportunity to turn the dark and dreary days of the last year, into something bright and beautiful for the years ahead. Let's put some positivity and color into this world, and it wouldn't hurt if we put some more curved steel in it as well. Ha! @brooke_smith_photography

We recently rolled some large cylinders on our DAVI MAV K30 plate roll. We rolled A36 Plate ¼" THICK X 120" WIDE x 40 ft long. We rolled 21 lengths x 40 ft all rolled to a 5'-0" outside radius. Albina's job was to Cut, Bevel, Roll, Tack Weld, and Brace for Shipping.

Albina Co., Inc. recently provided 102,000# of bent steel for the curved roof structure at the UCHealth Steadman Hawkins Clinic Denver in Englewood, Colorado. The building will serve as a rehabilitation and sports medicine center in Denver. The project's most prominant feature is the 185-ft-long, 40-ft-wide curved steel roof. The project is featured on the cover and as a feature article in of the February Issue of Modern Steel.

Albina provided the following materials for the project:

W30 X 99# A992- 2 pcs bent to a 401 ft radius the hardway

W21 X 44# A992- 2 pcs bent to a 401 ft radius the hardway

W16 X 26# A992- 36 pcs bent to a 401 ft radius the hardway

W16 X 31# A992- 2 pcs bent to a 401 ft radius the hardway

C10 X 20# A36- 2 pcs bent to a 66’-5” radius with flanges in

C10 X 20# A36- 2 pcs bent to a 51’-7” radius with flanges out

C12 X 20.7# A36- 12 pcs bent to a 401 ft radius the hardway

Albina recently provided 127,000# of bent steel for a 230-foot long bicycle bridge along the South Bayfront in Emeryville, CA. Albina induction bent 15 lengths of TS 16" X 16" X .625" WALL A1085 A513 to 149 ft and 289 ft radii and 9 lengths of TS 20" X 12" X .625" WALL A1085 A513 induction bent the easy way to 290 ft and 310 ft radii.

Photo Credit: Campus Planning & Facilities Management University of Oregon

Do you ever find yourself stumbling over your words when people ask you what you do or to describe what your company does? My father taught me at a young age that I should always have my elevator speech ready so I could describe to someone what we do in the amount of time it takes to travel up a few stories in an elevator. Since we can't ride in elevators with anyone other than our immediate family anymore, here is a quick 30 second video of some of the amazing rolled metal projects we have been a part of!

Photo Credits:
Signature Curved Steel Sky Bridge at the Phil and Penny Knight Campus for Accelerating Scientific Impact by Campus Planning and Facilities Mgmt. University of Oregon.
Portside Pier San Diego Bay CA. (Building and Staircase) by @haleyhillphotography
Barbara Walker Pedestrian Bridge along Portland's Wildwood Trail in Portland Oregon by Ed Carpenter
Circular Staircase at the "Trinity Complex", home to American Airlines Headquarters in Fort Worth, TX by Viva Railings LLC
Hayward Field Stadium Roof and Tower by Oregon Track & Field
Williams Creek Shoup Bridge in Salem, Idaho by Linda Ulery

The facelift to 1360 North Harbor Drive along the North Embarcadero is complete! The Port of San Diego and The Brigantine, Inc. began construction in July 2018 to redevelop Portside Pier including introducing four new dining concepts and enhancing the panoramic views of San Diego Bay for daily visitors. Albina Co., Inc. provided 60,000 pounds of various bent materials for the unique curved roof structure as well as for a signature spiral staircase that leads from the dock to the second floor public walkway and viewing deck. Photo Credit @haleyhillphotography

Materials bent by Albina Co., Inc. included:
TS 14" X 6" X .500" WALL A500 GR B (6 pieces spiral bent the easy way as tight as a 17 ft plan view radius, 4 pieces bent the easy way as tight as a 17 ft inside radius.)
TS 12" X 6" X .500" WALL A500 GR B (8 pieces bent the easy way as tight as a 2' 7" outside radius, 8 pieces spiral bent the easy way as tight as a 2' 7" plan view radius.)
TS 8" X 8" X .500" WALL A500 GR B (84 pieces bent to various radii and configurations.)
TS 18" X 6" X .375" WALL A500 GR B (4 pcs bent the hard way.)
W10 X 12# A992 (9 pcs bent the hard way.)
W18 X 35# A992 (15 pcs bent the hard way.)
W16 X 26# A992 (2 pcs bent the hard way.)
W14 X 22# A992 (13 pcs bent the hard way.)

Albina recently bent various parts for an interconnecting spiral staircase, modeled after the helical structure of DNA, at a new 1.6 million sq ft biotech campus in the Bay area. Materials: 1" OD X .120" WALL T304 S/S #4 FINISH, 1½" OD X .120" WALL 304 S/S #4 FINISH and 1½" OD X .180" WALL 304 S/S #4 FINISH
All railings and returns bent by Albina (flat rolling and spiral rolling).

Materials: PL 1" THICK X 14" WIDE A572-65, PL 1" THICK X 6.375" WIDE A572-65
Materials: 2½" X 2½" X 3/8" ANGLE A36, 2" X 2" X ¼" ANGLE A36
All misc. stair parts bent by Albina to various configurations.

Materials: PL 1" THICK X 14" WIDE A572-65
All Ribbon Helixes bent by Albina to a 3’-0” plan view radius (spiral rolled the easy-way).