Blog posts tagged with 'ornamental steel bending'

Our industry is faced with a labor shortage right now and we know that many shops are struggling to keep up with the flow of work. In this case, don't ask "Siri" for help, ask us! Albina Co., Inc. is fortunate to have a strong union labor force behind us with workers that are available to meet your IMMEDIATE NEEDS. If you have a rush project that you need to get done-WE CAN HELP! If you have spillover work you need assistance getting to your customer- WE CAN HELP! Why hire temporary workers that you need to train? Why not team up with Albina Co., Inc.? We can be an extension of your shop. Let us partner with you on such projects as: Small Parts Bending Handrails Bike Racks Supplemental Fabrication (cutting, trimming, coping, end finishing, drilling, small part welding, etc.) WE CAN WORK TO YOUR BUDGET NEEDS....you tell us where our price needs to be to meet your budget requirements and we will figure out a way to get it done at that price. IF LEAD-TIME IS A CONCERN, HAVE NO FEAR....you tell us when you need it and we will allocate the crew required to meet your needs. 

We recently completed a handrail project for a walkway around the Vancouver, Washington waterfront park. The projected consisted of 12 pieces of 2½" SCH40 T304 S/S 18 pieces of 1¼" SCH40 T304 S/S 17 pieces of 2½" SCH40 A53B ERW 26 pieces of 1¼" SCH80 A53B ERW We bend handrails for commercial, recreational, transportation and residential applications. Handrail Kits Are Available: Bent and trimmed per drawing, mid-rails trimmed and coped, assemblies supplied as individual parts or fabricated complete. Call us for your next handrail project!

We recently spiral bent tube steel 12" X 8" X .625" WALL A500 GR B Spiral the Easy way to a 173” radius for a customer spiral staircase located in Utah. Square and rectangular tubing is also known as HSS (hollow structural steel). Albina has the ability to bend both square and rectangular tubing. For rectangular tubing we can bend both the easy way (against the weak axis) and the hard way (against the strong axis). We can even provide Multi-Plane bending where we are bending both the easy way AND the hard way. Albina is a unique shop in that we can bend very small square materials such as TS ½” x ½” x .049” wall all of the way up to very large materials such as TS 20” x 12” x .625” wall, which happens to be the largest size that mills produce. Albina actually has a larger capacity than TS 20” x 12” x .625” wall, which means we can bend materials larger then what the mills produce!

We recently spiral rolled 1/2" and 1" plate for a custom spiral staircase in a multi-million dollar luxury home on Green Street in San Francisco, California. We provided the rolled plate for the staircase and then flat plane rolled the plate for the landings. The tightest radius was a 29.75” center line radius.

Albina recently used our induction heating process to spiral bend Tube Steel 16" X 16" X .625" WALL A500 GR B bent down to a an 18 foot radius for the new American Airlines headquarters in Fort Worth, Texas. The 1.7 million-square-foot complex, dubbed the “Trinity complex,” consists of constructing four seven-story buildings. It will cost at least $300 million to build and will house over 6,500 employees. There are 10 tower cranes on the project and there will be more than 1,000 construction workers on-site during the peak. It is scheduled to open during the second half of 2019. Including the 16" square, we have produced another set of spirals and have one in the queue. The one in the queue is Tube Steel 14" x 6" x .625" wall REALLY tight, exposed and bent to a 5'-6" radius on a 45° pitch. We already made a mock up for the job and all parties loved it. These are the type of bends that ONLY Albina can do! This is a really amazing project! Stay tuned for more pictures.

Albina recently spiral bent several stringers for a state of the art spiral staircase for the Buddy Holly Hall of Performing Arts and Sciences in Lubbock, Texas. The Lubbock Entertainment and Performing Arts Association (LEPAA) has had the vision for this building since 2013 and broke ground just over a year ago in April 2017. The dance center will contain the entire operation of Ballet Lubbock, including six dance studios, parent and community space, production areas and administrative offices and expected to be complete in early 2020. Check out this website for artist renderings of the building and interior features such as the spiral staircase we bent consisting of: TS 16" X 8" X .625" WALL A500 GR C 16 pcs: Spiral bend the easy way Bent down to a 7 ft plan view radius. TS 10" X 6" X .625" WALL A500 GR C 10 pcs: Spiral bend the hard way Bend down to a 14’ 11” plan view radius.