Blog

Thanks to Viva Railings LLC (Photo credit & Glass/Railing Fabricator) we have received some final installation pictures of the circular staircase at the "Trinity Complex", home to American Airlines Headquarters in Fort Worth, Texas. We spiral bent Tube Steel 16″ X 16″ X .625″ WALL A500 GR B bent down to a an 18 foot radius, using our induction heating process to create the spiral stringers for the staircase. In addition to the 16″ square, we produced another set of spiral stringers consisting of Tube Steel 14″ x 6″ x .625″ wall REALLY tight, exposed and bent to a 5′-6″ radius on a 45° pitch. These are the type of bends that ONLY Albina can do! The 1.7 million-square-foot complex, dubbed the “Trinity complex,” consists of four seven-story buildings. It cost nearly $300 million to build and houses over 6,500 employees. There were 10 tower cranes on the project and more than 1,000 construction workers on-site during the peak of the project.

Thank you to Avant Arc Quality Fabrication & Design, and Ninkasi Brewing Co., for giving Albina the opportunity to bend some cool parts for the Ninkasi Bar in Eugene, Oregon. Albina bent:
2" OD X .120" WALL HREW- 10 lengths x 20 ft to net 50 bent pieces- various degree bends all on a 12” radius.
2" OD X .120" WALL HREW- 4 lengths x 20 ft to net 40 bent pieces- various degree bends all on a 4” radius.
4" OD X .083" WALL T304 S/S- 2 lengths x 20 ft to net 2 bent pieces x 90° on a 55” radius and 2 bent pieces x 90° on a 44” radius.

Albina recently completed 233 pieces of 4" SCH40 A53B ERW bent in a Double 90° configuration on a 9" centerline radius for bollards for the back area of the new SoFi Stadium-Home of the Los Angeles Rams and the Los Angeles Chargers (loading dock, VIP parking, etc.) The bollards will be used for protection of the main structural columns at the stadium.

Albina Co., Inc. recently rolled 16 pieces of 5/8" plate A36 to as tight as a 162" radius. Six pieces of plate were used as the inside stringers of a beautiful spiral staircase at Altar'd State at the Forum Shops at Caesar's Palace. Six pieces of plate were used as the outside stringers of the staircase, and four pieces were used on the landings. We bent the stringers, trimmed rectangular treat cut outs, trimmed to length, match paired plates, tacked them together and match drilled all holes. We bolt matched the plates together with a 6 bolts, (2) on the end, (2) in the middle, and (2) on the other end.

We also bent 2½" X 2½" X ¼" ANGLE A36 to help create the spiral staircase. Materials included:

1 piece leg in to a 25” inside radius.  Albina to bend 180° minimum.

1 piece leg out to a 162” inside radius.  Albina to bend 70” minimum arc.

1 piece leg out to a 30” inside radius.  Albina to bend 36” minimum arc.

1 piece leg out to a 19” inside radius.  Albina to bend 80” minimum arc.

1 piece leg in to a 38” inside radius.  Albina to bend 180° minimum.

Lastly, we bent one piece of Flat Bar 5/8" x 12" A36 UM Plate leg in to a 38” inside radius and 180° minimum.

We have to send another shout out to PDX Wraps for creating another custom wrap for our recent conference room makeover. PDX Wraps offers full service design, print and install for personal and commercial projects. They also offer products for paint protection, watercraft and other custom wraps. Earlier this year, we used PDX Wraps to wrap the exterior and interior of our brand new mezzanine lunch room. Such a cool product!

Albina bent 40,000# of steel for the Freyer-Newman Center, home to Denvers’ Botanical Gardens. Albina bent 60 pieces of W8 X 31# A992 the hard way to a full scale layout. We also bent Tube Steel 8" X 6" X .500" WALL A500 GR B the hard way and MC8 X 20# A36 the hard way. The Freyer - Newman Center is a LEED GOLD building, designed by Denver’s Davis Partnership Architects. The Center will house six classrooms; four galleries; new herbaria for vascular plants, mushrooms and slime molds; laboratories; a new library and a coffee shop, and is slated for completion this spring. Final install pictures coming soon!

Albina provided 109,000# of bent steel for the Eli Lilly San Diego Biotech Center in La Jolla, CA. Eli Lilly doubled the size of its research facility to 300,000 square feet during this project. Materials included: 8″ X 8″ X 5/8″ ANGLE A36- half of the parts rolled leg in and half of the parts rolled leg out. Tube Steel 8″ X 8″ X .500″ WALL A500 GR B 8 5/8″ OD X .625″ WALL A500B Wide Flange W16 X 57# A992- Split into WT8 and rolled some parts stem in and rolled some parts stem out. Wide Flange W24 X 103# A992- DOUBLE split to a finished height of 8¼” tall. Albina then rolled some parts stem in and other stem out.

Albina bent 45,000 lbs. of steel for the Chase Center- Home of the Golden State Warriors. Materials bent included Tube Steel 2" X 2" X .250" WALL A500 GR B, Tube Steel 14" X 14" X .500" WALL A500 GR B, Tube Steel 3" X 3" X .375" WALL A500 GR B, and Tube Steel 12" X 12" X .500" WALL A500 GR all bent to a 270 ft radius. The stadium is located in the Mission Bay area of San Francisco.

With every new year comes change and this new year we have a few announcements about some changes to our Albina team.

Albina elliptically bent 50,000# of 14" XH pipe, all material exposed, to extremely tight tolerances for the Wagon Creek Pedestrian Bridge in Mt. Shasta, California. The McConnell Foundation partnered with Siskiyou County by awarding a $600,000 grant for the Wagon Creek Bridge, and the bridge is considered the crown jewel of the Lake Siskiyou Trail.