Blog posts tagged with 'albina co inc'

Abina reently partnered with @CreativeMachines to create some amazing curved steel artwork that will be installed very soon. The first piece we provided bent material for is titled "ACB Globe." Albina bent 12 lengths of 2½" SCH80 T304 S/S to a 6’-11” radius – 7’-4” radius.

The second piece we provided bending for is titled "Orbits Interweave" at NASA's Goddard Space Center. Albina bent 1 length of 3" SCH160 2507 SUPER DUPLEX S/S SMLS to a 19’-2” radius, 1 length 1½" SCH80 2507 SUPER DUPLEX S/S SMLS to a 13’-9” radius, and 3 pieces of 6" SCH40 A53B ERW to a 10’-2½” radius.

Albina loves to partner with local and national artists on fun and exciting projects like these! We help make curved steel art possible for corporate campuses, government buildings, museums, courtyards, entry-ways, university buildings and common areas, parks and much more.

Albina Co., Inc. recently provided 102,000# of bent steel for the curved roof structure at the UCHealth Steadman Hawkins Clinic Denver in Englewood, Colorado. The building will serve as a rehabilitation and sports medicine center in Denver. The project's most prominent feature is the 185-ft-long, 40-ft-wide curved steel roof. The project is featured on the cover and as a feature article in the February Issue of Modern Steel. https://lnkd.in/eDn5SbQ
Photo credit: Adam Poticha
Bent by Albina:
W30 X 99# A992- 2 pcs bent to a 401 ft radius the hardway
W21 X 44# A992- 2 pcs bent to a 401 ft radius the hardway
W16 X 26# A992- 36 pcs bent to a 401 ft radius the hardway
W16 X 31# A992- 2 pcs bent to a 401 ft radius the hardway
C10 X 20# A36- 2 pcs bent to a 66’-5” radius with flanges in
C10 X 20# A36- 2 pcs bent to a 51’-7” radius with flanges out
C12 X 20.7# A36- 12 pcs bent to a 401 ft radius the hardway

Albina Co., Inc. recently rolled some rooftop handrails for the Hotel Nikko, a luxurious boutique hotel in San Francisco. Materials bent included:

1½" SCH40 A53B ERW WHEELED
150 pcs- cut, cope, deburr and bent by Albina. Albina held the coped end at a specified dimension and left the other end long for field trimming. All rails were bent on a 4” center-line radius.

1½" SCH40 T316L S/S #4 POLISH
74 pcs- cut, cope, deburr and bent by Albina. Albina held the coped end at a specified dimension and left the other end long for field trimming. All rails were bent on a 4” center-line radius.

Curved steel treehouse structures provide a tranquil and relaxing break area for the employees of NVIDIA, a computer hardware manufacturer, at the corporate headquarters in Santa Clara, California. Albina Co., Inc. was the steel bender-roller on this project. We bent 55,000# of bent material including:

TS 12" X 4" X .500" WALL A500 GR B

               6 pcs bent the easy way to a 28 ft radius (30 ft of bent material per pc).  Material bent and trimmed by Albina.

TS 5" X 5" X .375" WALL A500 GR B

               12 pcs bent to a 31 ft radius (16 ft of bent material per pc).  Material bent, trimmed and drilled by Albina.

TS 8" X 2" X .250" WALL A500 GR B

               89 pcs bent the hard way to an approx. 32 ft radius (approx. 18 ft of bent material per pc).  Material bent, trimmed and drilled by Albina.

3" X 3" X ¼" ANGLE A36

               12 pcs bent leg in to a 31 ft radius (15 ft of bent material per pc).  Material bent and trimmed by Albina.

TS 3" X 3" X .250" WALL A500 GR B

               4 pcs bent to a 5 ft radius (7 ft of bent material per pc).  Material bent and trimmed by Albina.

TS 5" X 3" X .250" WALL A500 GR B

               4 pcs bent the easy way to a 5 ft radius (7 ft of bent material per pc).  Material bent and trimmed by Albina.

5" X 5" X ½" ANGLE A36

               6 pcs bent leg out to a 2 ft radius (1 ft of bent material per pc).  Material bent and trimmed by Albina.

“Wind Witches” by Brian Borrello. The rounded twisting shapes of “Wind Witches” by Brian Borrello are inspired by the logarithmic spiraling within desert plants. The two sculptures are also an expression of the order and symmetry found in nature. Located at Big Bend Community College in Moses Lake, WA. Materials bent and Fabricated complete by Albina. Photo credit: Brian Borrello.

Assembly #1: 3" SCH40 T304/T304L S/S (bent to a 14 ft radius)
Overall height- 15 – 21 ft tall.
Albina to pre-polish pipe, Trim Pipe, Weld pipe to Base Plates, and Fit / Weld on Leaf Flanges.

Assembly #2: 2½" SCH40 T304/T304L S/S (bent to a 10’-6” radius).
Overall height- 10 – 14 ft tall.
Albina to pre-polish pipe, Trim Pipe, Weld pipe to Base Plates, and Fit / Weld on Leaf Flanges.

That’s One Big Slinky! Albina recently coiled two assemblies out of 39 lengths x 20 feet of 2” OD x .120” wall T304 s/s (180 grit). Albina rolled, trimmed, weld prepped and TIG welded each coiled length. The material was coiled to a 90” diameter. Albina has the expertise to bend coils to virtually any configuration. We coil all forms of material: pipe, tubing, square and rectangular. We also work with all types of material: carbon, stainless, aluminum, copper, zirconium, etc. Photo Credit: @Brooke_Smith_Photography

The Leach Botanical Garden in Portland, Oregon underwent a six year, $12.6 million dollar renovation complete with new garden space, walking paths, a unique curved steel Aerial Tree Walk, an arbor and a fireside terrace. The Oregonian featured an article titled "Leach Botanical Garden Unveils $12.6 Million Renovation, a Gift of Green Space for SE Portland."

Albina bent the following materials for the project:

3" X 2" X ¼" ANGLE T304L S/S
63 lengths rolled to various configurations and radii- all per customer supplied drawings.
Customer to trim and splice as required (Albina roll only).

W12 X 26# A588
24 lengths 40 – 50 ft long.
Rolled the easy way to various configurations and radii- all per customer supplied drawings.
Customer to trim and splice as required (Albina roll only).

FB ¼" X 4" A588
49 lengths x 20 ft
Rolled the easy way to various configurations and radii- all per customer supplied drawings.
Customer to trim and splice as required (Albina roll only).

Albina Co, Inc. produces consistent, accurate and repeatable rolled metal parts and components for various OEM and industrial business sectors. We produce small parts such as pipe spools, hydraulic lines, handles, brake bands, boiler tubes, heat exchangers, and coils.

We bend and fabricate pipe spools for a variety of different industries. We have the ability to provide small and large spools out of both carbon and stainless materials. Our qualified welders can TIG or MIG weld spools depending on customer requirements.

Our bent steel can be seen on various applications in the auto, marine, aviation, locomotive, agricultural and food processing sectors. Our bends are used on locomotive frames, boat frames, deck rails and even components for homeland security helping to protect our docks and ports. Here is an example of an extremely impressive bend for a commercial processing application:

Albina bent, torch cut out, fit and tack welded 10" SCH120 SA106B SMLS to a 12 ft radius.

Our plate roll is consistently rolling custom tanks for countless industries, brake bands for industrial manufacturers and non-standard pipe diameters.

Our qualified crew has the skills required to fabricate your wear backs, or other pressure retaining components.

If your product needs to be opened, closed, held or picked up, we can produce your handle!

Albina has the expertise to bend coils to virtually any configuration. We coil all forms of material: pipe, tubing, square and rectangular. We also work with all types of material: carbon, stainless, aluminum, copper, zirconium, etc. One call can result in bent material fully fabricated with flanges, fittings, miscellaneous components, etc.

Most alternative energy projects require AESS (Architecturally Exposed Structural Steel) and Albina can bend to your AESS requirements. Team up with Albina on your next project so we can help you recognize savings and treat you to a stress free experience. 

As we near the end of the pandemic, and start to come out of the recession, we are seeing little signs of change and positivity more and more every day. The phones are ringing, people are becoming more engaged, and projects are finally getting off the ground. Together, we have the opportunity to turn the dark and dreary days of the last year, into something bright and beautiful for the years ahead. Let's put some positivity and color into this world, and it wouldn't hurt if we put some more curved steel in it as well. Ha! @brooke_smith_photography

We recently rolled some large cylinders on our DAVI MAV K30 plate roll. We rolled A36 Plate ¼" THICK X 120" WIDE x 40 ft long. We rolled 21 lengths x 40 ft all rolled to a 5'-0" outside radius. Albina's job was to Cut, Bevel, Roll, Tack Weld, and Brace for Shipping.