Check out the August Issue of Modern Steel for “What’s Cool In Steel” Albina was the bender/roller on two of the featured projects including the Basher Pedestrian Bridge at the San Diego Zoo (pages 23-26) and a Des Moines sculpture titled “A Monumental Journey” by artist Kerry James Marshall (pages 30-31). We are working on securing some final install pictures of each of these projects! Stay tuned!
We were in Seattle this weekend and were able to get some exterior pictures of The Madison Center. The Madison Center is a 530 foot tall, 36 story high rise office building in Seattle, Washington and is featured in the June edition of Modern Steel. Albina Co., Inc. was the bender/roller on this project and worked specifically on what is being called "The Great Room" which is a 45-foot tall steel framed entryway rotunda. Albina bent many material types for this project including tube steel 8" x 6" up to 12" x 12", 3" x 3" angle, W10 and W16 wide flange, 8" pipe and more. Check out the article for some more details on the architectural feat and some great pictures. We will be heading back up to Seattle next week to get some interior shots. Stay tuned!
Exterior Picture of The Madison Center Great RoomThe Great Room RotundaClose up of Curved Steel Wide Flange, Tube Steel and PipeCurved Steel Spiral Staircase
Albina Co., Inc. bent at total of 24,000# of steel including 12 ¾" OD x .375" wall material and MC12 x 10.6# material for the new steel-framed UCHealth Longs Peak Hospital in Longmont, Colorado. The project is featured in the July issue of Modern Steel Construction and the article details many of the structural design challenges as well as the importance of early involvement of specialty fabricators.
Check out the cover spot and three page feature article on Albina Co., Inc. in the June/July West Coast Edition of A2Z Manufacturing Magazine. Pages 24-26! Portland artist Devin Laurence Field produced the laser-cut stainless steel flame sculpture and Albina Co., Inc. bent 18" STD A53B ERW 10 lens x 40 ft down to a 42 ft radius for the sculpture.
We had such a great time working with Linda and Kim to highlight and showcase all of the amazing curved steel projects we have done in Oregon, Washington, and California. Some projects featured in the article include:
Portland International Airport CanopyDale Chihuly Garden and Glass Museum- Seattle, WA."The Spheres" Seattle, WA.
We had to mill order 12" SCH40 (.406" WALL) 6061-T6 Aluminum material to create the curved members for the overhead canopy at Pacific Plaza park in Dallas, Texas. This is a VERY rare material to get out of a mill. We ordered 30 lengths in total and bent, trimmed and marked top dead center on all parts. The material was bent to AESS (Architecturally Exposed Structural Steel) standards and very tight tolerances. Pacific Plaza has officially broken ground and is part of an urban renewal project transforming surface parking lots into a neighborhood park. The park is slated to be completed by the fall of 2019.
Pipes in bending processPipes Ready to ShipArtist Rendering of Pacific Plaza Park Curved Structure
The Madison Center is a 530 foot tall, 36 story high rise office building in Seattle, Washington and is featured in the June edition of Modern Steel. Albina Co., Inc. was the bender/roller on this project and worked specifically on what is being called "The Great Room" which is a 45-foot tall steel framed entryway rotunda. Albina bent many material types for this project including tube steel 8" x 6" up to 12" x 12", 3" x 3" angle, W10 and W16 wide flange, 8" pipe and more. Check out the article for some more details on the architectural feat and some great pictures. We will be heading up to Seattle soon to get some pictures of our own to share. Stay tuned!
Check out the cover spot and three page feature article on Albina Co., Inc. in the June Rocky Mountain Edition of A2Z Manufacturing Magazine. Pages 18-20! We had such a great time working with Linda and Kim to highlight and showcase all of the amazing curved steel projects we have done in Colorado, Utah, Idaho, Montana and Wyoming. Some projects featured in the article include:
Sun Valley Music Pavillion in Sun Valley, ID. 220,000# of pipe rolled ranging from 10" Sch80 to 10" XXHCustom Signage at Entrance to Yellow Stone National Park Attraction "Buffalo Bill Cody Stampede Park"Ellie Caulkins Opera House Denver, CO. 210 lengths 1-1/2" x 1-1/2" x 3/16" angle rolled to numerous compound radii
Albina Co., Inc. was the steel bender/roller for the Curved Steel Bio-Sphere buildings in Seattle, WA. Albina bent 750,000# and 1,050 pieces rectangular tube steel bent the easy way and a portion bent off-axis. Almost 8 miles of welding work and grinding was avoided because of Albina’s ability to bend a portion of the project. Almost NO correction was needed during fabrication or erection as the bends fit to the fixtures within 1/32nd of an inch!
Albina recently bent 96,000# of steel consisting of 75 pieces of TS10" X 6" X .500" WALL A500 GR B and TS 10" X 6" X.625" WALL A500 GR B bent the hard way for the curved Steel roof structure at the Rainbow Recreation Center in Oakland, CA. The renovation and expansion of the Rainbow Rec Center is a 13.7 million dollar project expected to be completed by Spring 2019.
On Friday, March 2nd, almost a year-and-a-half after announcing the Phil and Penny Knight Campus for Accelerating Scientific Impact, the University of Oregon broke ground for the new campus! The project is slated to be complete by 2020. A signature sky bridge over Franklin Boulevard will connect the campus to other U of O research facilities while creating a gateway corridor between Eugene and Springfield. Albina Co. Inc. bent 22" OD X 1" WALL CARBON STEEL PIPE to a 105 foot centerline radius for the sky bridge. What an amazing project! Stay tuned for install pictures!
